GF-L12E – Mid-Rise Scissor Lift

The Guorange L12e is an industrial-grade electric-release hydraulic mid-rise scissor lift engineered for high-throughput automotive repair shops, tire bays, detailing studios, and commercial fleet garages. Featuring an 8,000 lb (3,500 kg) lifting capacity and an extended maximum lifting height of 47 inches (1,194 mm), the L12e delivers rapid 30-second lifting cycles for brake overhauls, suspension servicing, wheel maintenance, and undercarriage inspections. Equipped with a centralized electric safety lock release, a low-profile 4.3-inch (110 mm) drive-on height, and an integrated mobile caster kit, the L12e delivers flexible workshop mobility and heavy-duty vehicle support without requiring overhead ceiling clearance or air supply lines at the console.

Key Features :

8,000 lb (3,500 kg) Hydraulic Lifting Power: High-pressure 20 MPa hydraulic power unit lifts passenger sedans, performance sports cars, SUVs, and light trucks in approximately 30 seconds.
100% Electric Lock Release (Air-Free Operation): Features an electric solenoid lock release system operated directly via the centralized 24V control console, eliminating the need to plumb compressed shop air lines to the lift unit.
Extended 47″ Max Lifting Height: Provides higher working clearance than standard mid-rise lifts, giving technicians comfortable access for tire, exhaust, and suspension work in low-ceiling bays.
Ultra-Low 4.3″ (110 mm) Collapsed Profile: Low drive-over profile paired with extended 81.5″ (2,070 mm) drive-up ramps enables low-chassis and performance vehicles to load smoothly without bottoming out.
5-Position Mechanical Safety Locking System: Heavy-duty steel locking pawls mechanically secure the platform across 5 working heights to prevent hydraulic load settling.
Integrated Mobile Caster Kit: Includes heavy-duty tow handle and caster wheels, allowing a single technician to reposition the lift across bays or store it when clear floor space is needed.
24V Low-Voltage Safe Control Console: Centralized operator console protects technicians from high-voltage contact and includes an automatic upper height limit switch to prevent cylinder over-extension.
Maintenance-Free Self-Lubricating Bushings: Scissor pivot pins are fitted with self-lubricating bronze bearings to minimize mechanical friction and extend service intervals.

Configurable Options (B2B Customization)

We configure power units and operational components prior to production to match regional electrical grids and OEM distribution requirements:

Electrical System Configurations: Standard 110V / 1PH (30A) or 220V / 1PH (60Hz) power unit, or pre-configured 220V / 380V (50/60Hz, 3-Phase) builds for international distribution.
Brand & Finish Customization: Custom color industrial powder coatings, private-label nameplates, tailored platform rubber riser block sets, and optional adjustable chassis support bars (Low MOQ available).

B2B Commercial & Support Terms
- Commercial Warranty: Full manufacturer warranty covering the high-tensile scissor frame, hydraulic cylinders, and 24V control console, backed by rapid spare parts dispatch.
- Global Logistics & Mixed Loading: Export-standard reinforced steel-framed crating; fully supports mixed-container logistics alongside tire changers, wheel balancers, and two-post lifts.
- Technical Assistance Channel: Direct factory engineering access for remote electrical diagnostics, hydraulic bleeding guidance, and structural service support.

Specifications

Equipment Model	Guorange L12e
Lift Type	Mid-Rise Hydraulic Scissor Lift
Safety Lock Release	Centralized Electric Solenoid Release
Rated Lifting Capacity	8,000 lbs (3,500 kg)
Max Lifting Height	47.0" (1,194 mm)
Min Lowered / Lock Height	4.3" (110 mm)
Lifting Time	~30 seconds
Platform Dimensions (L × W)	81.5" × 20.1" (2,070 × 510 mm)
Width Between Platforms	32.2" (818 mm)
Rated Hydraulic Pressure	20 MPa
Mechanical Lock Positions	5 Positive Locking Heights
Control System	24V Low-Voltage Safety Console
Power Supply	110V (30A) or 220V AC, 60Hz, 1PH (Configurable 380V 3PH)
Hydraulic Fluid Type	AW-46 (AW-32 recommended for cold climates)
Standard Accessories	Drive-Up Ramps, Composite Rubber Lifting Blocks, Mobile Caster Kit
Optional Accessories	Adjustable Chassis Support Bars
Compliance & Standards	CE Certified (115% Dynamic / 150% Static Tested), EAC

FAQs

Q1: What is the primary operational difference between the Guorange L12e and L12p models?

The L12e features a centralized electric lock release system that unlocks the safety pawls via internal electric solenoids, requiring only an electrical connection and zero compressed air lines. The L12p utilizes a pneumatic lock release mechanism that connects to your workshop's compressed air line to disengage the mechanical locks.

Q2: How does the 4.3" collapsed profile and 47" lift height benefit space-constrained shops?

The ultra-low 4.3" clearance allows low-slung performance vehicles to drive directly onto the platforms without scraping. The 47" lifting height provides an ergonomic working level for tire, brake, and suspension servicing in facilities with ceiling heights under 10–12 feet where full-height two-post lifts cannot be installed.

Q3: What is the typical lead time for standard wholesale and custom OEM orders?

Standard configurations typically ship within 20–30 days from deposit confirmation. Custom private-label runs, specific powder-coat colors, and customized motor voltage configurations are scheduled upon engineering design approval.