GF-B76 Wheel Balancer(automatic A/D)

GF-B76 Wheel Balancer(automatic A/D)

The Guorange B76 is an industrial-grade digital wheel balancer engineered for high-throughput automotive repair shops, tire service bays, and performance garages. Featuring a compact, hoodless (open-access) footprint, high-resolution sensor hardware, and an intuitive step-by-step digital interface, the B76 delivers ±1g precision within a rapid 7-second measuring cycle while maximizing shop floor efficiency. Powered by an efficient 0.25 kW pure copper winding motor operating at 180 RPM, this unit handles rim diameters up to 30 inches and wheel assemblies up to 65 kg (143 lbs), making it a dependable, space-saving asset for passenger vehicles, SUVs, and light trucks.

Key Features :

Space-Saving Open-Access Design: Hoodless profile eliminates overhead clearance constraints and the need to repeatedly open/close a hood, significantly reducing machine footprint and accelerating cycle times in tight workshop bays.
High-Resolution Sensor Array: Precision digital sensors and software calculate static and dynamic imbalance simultaneously to deliver repeatable ±1g balancing accuracy on the first spin.
On-Screen Weight Placement Guidance: Clear digital display provides visual correction points, guiding technicians to the exact position for adhesive or clip-on weights without manual indexing or guesswork.
Expanded Wheel Compatibility: Accommodates rim diameters up to 30″ (762 mm), wheel widths from 3″ to 12″, and total wheel weights up to 65 kg (143 lbs) across passenger cars, SUVs, and commercial fleets.
Vibration-Isolated Spindle Assembly: Precision-engineered spindle shaft and rigid steel chassis minimize mechanical resonance and suppress vibration during high-speed 180 RPM spinning.
Rapid 7-Second Measuring Cycle: Fast processing cycle shortens per-wheel balancing time to maximize bay turnover and daily shop throughput.
Intuitive Operator Interface: Step-by-step navigation menus and clear operational prompts reduce technician onboarding barriers and prevent operational entry mistakes.

Configurable Options (B2B Customization)

We configure power units and structural hardware prior to production to match regional electrical grids and OEM distribution requirements:

Electrical System Configurations: Standard 110V / 1PH / 60Hz setup, or pre-configured 220V / 240V / 380V (50/60Hz, Single or Three-Phase) for global markets.
Marca & Finish Customization: Custom color powder coatings, private-label branding plates, tailored cone kits, and export-grade crating (Low MOQ available).

B2B Commercial & Support Terms
- Commercial Warranty: Factory warranty covering the pure copper motor, digital sensor boards, and mechanical spindle assembly, supported by expedited spare parts authorization.
- Global Logistics & Mixed Loading: Export-standard packaging; fully supports mixed-container logistics alongside tire changers and car lifts to optimize freight costs.
- Technical Assistance Channel: Direct factory engineering access for remote diagnostics, sensor calibration support, and electrical configuration assistance.

Specifications

Equipment Model	Guorange B76
Design Type	Open-Access / Hoodless Digital Wheel Balancer
Balancing Accuracy	±1 g (0.04 oz)
Measuring Cycle Time	7 seconds
Balancing Spin Speed	180 rpm
Rim Diameter Range	< 30" (762 mm)
Wheel Width Range	3" – 12" (76 – 305 mm)
Max Wheel Diameter	< 880 mm (34.64")
Max Wheel Weight	< 65 kg (143 lbs)
Rim Center Hole Diameter	< 135 mm (5.31")
Motor Power	0.25 kW Pure Copper Winding
Standard Power Supply	110V / 1PH (Configurable to 220V / 380V)
Chassis Construction	High-Tensile Reinforced Welded Steel
Compliance & Standards	Full CE & EAC Certified for Global Export

Perguntas frequentes

Q1: What are the operational advantages of the open-access (hoodless) design?

The hoodless configuration eliminates the space required for a traditional swinging safety hood, reducing the machine’s floor footprint. It also removes the physical step of raising and lowering the cover for every spin, shaving valuable seconds off each wheel service cycle in high-volume tire shops and mobile service vans.

Q2: What is the typical lead time for standard wholesale and custom OEM orders?

Standard configurations typically ship within 20–30 days from deposit confirmation. Custom private-label runs, specific powder-coat colors, and customized motor voltage configurations are scheduled upon engineering design approval.

Q3: How are replacement sensors and electronic components supported internationally?

We maintain a dedicated stock of all wear parts, optical sensors, motherboard assemblies, and quick-nut accessories. Replacement components can be dispatched via international express channels alongside direct remote diagnostic assistance from our technical team.